in ABC
Cancel
editing
Last character
to edit
Save changes
Specifying a text string
This type of dialog allows a character string to be specified e.g. an error message. With the up/down keys you can scroll through the
alphabet and several special characters. Pressing 'Next' selects the next character to edit.
When the last character is reached you can save the text string by pressing 'Save' or discard the changes pressing 'Cancel'.
Use the LCD panel as parameter storage
For backup purposes or if several UMCs should be configured with a similar or same set of parameters the LCD panel can be used
as storage. Up- and download are done by command. You can choose if you uploaded or download only the application or only the
parameters or both.
Please note that the bus address will not be overwritten during download. This prevents communication problems
due to the usage of the same bus addresses multiple times.
In case of a device replacement this means that the bus address must be set separately!
109
To Next Page
Loading...
Need help?
General
