ABB MRP31.0 User Manual

UMC with
DNP31
UMC with
DNP31
AC500
with
DeviceNet
Master
Using the UMC100.3 in a DeviceNet Network
DeviceNet is based on the Controller Area Network (CAN) technology and mostly used in the Americas.
To integrate the UMC100 into a DeviceNet network use the DNP31 communication interface.
The figure below shows the sketch of a DeviceNet line with DNP31 and UMC100s.
More details are available in the technical manual of the DNP31.
—
DeviceNET Line with UMC100.3 and DNP31. Use standard DeviceNet cable for wiring
30
UMC100.3 UNIVERSAL MOTOR CONTROLLER TECHNICAL DESCRIPTION

ABB MRP31.0 Specifications

General

Brand	ABB
Model	MRP31.0
Category	Controller
Language	English