Accessing Data on PROFIBUS / PROFINET
"Configuring the Fieldbus Configuration" and "Commissioning->Configuration from within the control system". For more information
-
nual. For more information about integrating the UMC in a PROFINET IO network please refer to the PNQ22 (PROFINET IO communi-
to profile 2. The module is part
Accessing Data on Modbus / ModbusTCP
On Modbus/ModbusTCP data is provided in so-called registers. A Modbus/ModbusTCP master can read and write data on these
registers. For more information about integrating the UMC in a Modbus network please refer to the MRP31 (Modbus communica-
Accessing Data on DeviceNet
-
-
Accessing Data on EtherNet/IP™
website: www.abb.com
-
•
• All other connections have to be Listen-Only or Input-Only.
•
• All connections that shall be used in parallel must be configured as "multicast connections".
•
122
To Next Page
Loading...
Need help?
General
