Select previous option
Select next option
Back to main menu
Available commands
are dependent of the
selected starter function
Start motor in selected
direction (if possible)
Motor stop
(if possible)
Present motor status
(stopped)
Cntrl (left hotkey)
Main menu
Motor control menu
Starting and Stopping the Motor
If control via LCD panel was enabled, it is possible to start/stop the motor from the 'Control' menu which can be accessed from the
top level menu when pressing the left hot key (Cntrl). Depending on the selected control function a list of possible start directions
is displayed. Pressing the green start button starts the motor in the selected direction. Pressing the red stop button stops the mo-
tor. The motor status icons show you the present status of the motor.
111
To Next Page
Loading...
Need help?
General
