EasyManuals Logo
Home>ABB>Computer Hardware>TPU2000

ABB TPU2000 User Manual

ABB TPU2000
374 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
TPU2000/2000R Modbus/Modbus Plus/ Modbus TCP/IP Automation Guide
120
Register
Address
Item Description (Multiplier if any)
41740 I 1-2 (Ang) – Positive Sequence
Angle Winding 2
Unsigned 16 Bit
41741 I 2-2 (Ang) – Negative Sequence
Angle Winding 2
Unsigned 16 Bit
41742 Scale - Phase Wdg 1 Unsigned 16 Bit
41743 Scale - Phase Wdg 2 Unsigned 16 Bit
41744 Scale - Neutral Wdg 1 Unsigned 16 Bit
41745 Scale - Neutral Wdg 2 Unsigned 16 Bit
The 3 Winding Differential Fault Register Definition Table follows.
Table 5-34. 3 Winding Differential Fault Record Address Table
Register
Address
Item Description (Multiplier if any)
42305 Differential 3 Winding Fault Control
Register
1 = First Record
2 = Next Record
3 = Oldest Unreported Record
Fault Record Control Register
Unsigned 16 Bit
1 = Fill 42306 through 42352 with First Record in Data
Buffer.
2 = Fill 42306 through 42352 with next Record Data
pointed to in buffer.
3 = Fill 42306 through 42352 with the last (oldest
unreported) record of data.
42306 Parameter Flag Unsigned Integer 16 Bit
42307 Fault Type Element
Unsigned 16 Bit
00 = 87T – % Differential Alarm
01 = 87H – High Set Inst. Differential Alarm
02 = 51P-1 – Winding 1 Phase Time Overcurrent
03 = 51P-2 – Winding 2 Phase Time Overcurrent
04 = 50P-1 – 1
st
Winding 1 Phase Inst. Overcurrent
05 = 50N-1 – 1
st
Winding 1 Neutral Inst. Overcurrent
06 = 150P-1 – 2
nd
Winding 1 Phase Inst. Overcurrent
07 = 150N-1 – 2
nd
Winding 1 Neutral Inst. Overcurrent
08 = 46-1 – Neg. Sequence 1 Inst. Time Overcurrent
09 = 51P-2 – Winding 2 Phase Time Overcurrent
10 = 51G-2 – Winding 2 Ground Time Overcurrent
11 = 50P-2 – 1
st
Winding 2 Phase Inst. Overcurrent
12 = 50G-2 – 1
st
Winding 2 Ground Inst. Overcurrent
13 = 150P-2 – 2
nd
Winding 2 Phase Inst. Overcurrent
14 = 150G-2 – 2
nd
Winding 2 Ground Inst. Overcurrent
15 = 46-2 – Neg. Sequence 2 Inst. Time Overcurrent
16 = ECI-1 – Event Capture Initiate 1
17 = ECI-2 – Event Capture Initiate 2
18 = Through Fault
19 = Harmonic Restraint
42308 Setting At Fault Event Unsigned 16 Bit
01 = Primary Settings
02 = Alternate 1 Settings
03 = Alternate 2 Settings
42309 Fault Record Number Unsigned 16 Bit

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB TPU2000 and is the answer not in the manual?

ABB TPU2000 Specifications

General IconGeneral
BrandABB
ModelTPU2000
CategoryComputer Hardware
LanguageEnglish

Related product manuals