ABB UNO-3.0-TL-OUTD-S User Manual

- 23 -
000469AG
2 - Characteristics
Bracket dimensions
The dimensions of the wall mounting bracket are expressed in
mm and inches.
25
218
50.5
32
B
A
A
21.5
15.5
6
42
30.5 9
9
14
B
10
190
10
269±0.3
1.5
B-BA-A
71.4
53
76
93
56
37.7 37.7
21.521.5
Скачано с сайта интернет магазина https://axiomplus.com.ua/

ABB UNO-3.0-TL-OUTD-S Specifications

General

Brand	ABB
Model	UNO-3.0-TL-OUTD-S
Category	Inverter
Language	English

Summary

Introduction and General Information

Field of Use and General Conditions

Specifies the intended applications and general operating conditions for the inverter.

Characteristics

Models and Range of Equipment

Details the different inverter models covered by the manual based on output power.

Technical Data and Specifications

Provides detailed technical specifications and data for the inverter models.

Safety Devices and Functions

Details the built-in safety mechanisms like Anti-Islanding and ground fault detection.

Safety and Accident Prevention

General Safety Instructions

Thermal and Electrical Hazards

Warns about potential risks from hot parts and electrical hazards during operation and maintenance.

Residual Risks and Remedies

Installation

General Installation Conditions

Installation Position and Wall Mounting

PV Generator Connection Procedures

Covers essential pre-connection checks for the PV generator to ensure safety and compatibility.

Input Connection to PV Generator (DC Side)

Explains how to safely connect the PV generator to the inverter's DC input.

AC Output Connection to Grid

Details the process for connecting the inverter's AC output to the distribution grid.

RS485 Communication Signal Connection

Control Signal Connections

Instruments

Keyboard and LED Panel Description

Operation

Commissioning and Firmware Update

Outlines the step-by-step procedure for commissioning the inverter after installation.

Display Access and Settings Management

LED Status Indicators and Behaviour

Menu Navigation Structure

System Menu Settings

Settings Menu Options

Inverter Menu Statistics

Statistics Data

Operation Settings and Parameters

Alarm Configuration and Stand Alone Mode

Maintenance

Routine Maintenance Procedures

Troubleshooting Alarm Messages

Guides users on how to understand and resolve warning and error signals displayed by the inverter.

Power Limitation Messages and Causes

Service Password Registration Process

Ground Leakage and Insulation Resistance Checks

Explains how to check for ground leakage and measure PV generator insulation resistance.