- 42 -
000019DG
General conditions
Some indications are only valid for large sized products or packages containing multiple small
sized products.
Transport and handling
Transport of the equipment, especially by road, must be carried out by
suitable ways and means for protecting the components (particularly
electronic components) from violent shocks, humidity, vibrations, etc.
During handling, do not make any sudden or fast movements that
could generate dangerous swinging.
Lifting
ABB usually stores and protects individual components by suitable
means to make their transport and subsequent handling easier. Non-
etheless, as a rule, it is necessary to turn to the experience of specialised
staff to take charge of loading and unloading components.
Where indicated and/or available, eyebolts or handles, which can be
used as anchorage points, are inserted and/or can be inserted.
The ropes and means used for lifting must be suitable for bearing the weight of the equip-
ment.
Do not lift several units or parts of the equipment at the same time unless
otherwise indicated.
Unpacking and checking
Bear in mind that the packaging elements (cardboard, cellophane,
staples, adhesive tape, straps, etc.) may cause cuts and/or injuries if not
handled with care. They should be removed by suitable means and not
left in the hands of individuals who are not responsible (e.g. children).
The packaging components must be disposed of in accordance with the regulations in force
in the country of installation.
When you open the package, check that the equipment is undamaged
and make sure all the components are present.
If any defect or damage is detected, please stop, contact the carrier and
also promptly inform the ABB Service Department.
4
Lifting and transport
Скачано с сайта интернет магазина https://axiomplus.com.ua/
To Next Page
Loading...
Need help?
General