- 38 -
000016BG
Safety instructions and general information
The equipment has been manufactured in accordance with the strictest
accident-prevention regulations and supplied with safety devices suitable
for the protection of components and operators.
It is clearly impossible to anticipate the vast number of installations and environments in which
the equipment will be installed. It is therefore necessary for the customer to appropriately
inform the manufacturer about particular installation conditions.
ABB accepts no liability for failure to comply with the instructions for
correct installation and will not be held responsible for systems upstream
or downstream of the equipment it has supplied.
It is essential to provide operators with correct information. They must therefore read and
comply with the technical information given in the manual and in the attached documentation.
The instructions given in the manual do not replace the safety instructions
and technical data for installation and operation displayed on the product,
nor do they replace the safety regulations in force in the country of
installation or common sense.
The manufacturer is willing to train staff, at its premises or on site, in
accordance with conditions to be set out in the contract.
Do not use the equipment if you detect any operating anomalies.
Avoid improvised or temporary repairs. All repairs should be carried out
using only original spare parts, which must be installed in accordance
with their intended use.
Liabilities arising from commercial components are delegated to the
respective manufacturers.
1
2
TRAINING
3
Safety and accident prevention
Скачано с сайта интернет магазина https://axiomplus.com.ua/
To Next Page
Loading...
Need help?
General