- 39 -
000017GG
3 - Safety and accident prevention
Hazardous areas and operations
Environmental conditions and risks
The equipment can be installed outdoors, but only in environmental
conditions that do not prevent its regular operation. These conditions are
listed in the technical data and in the installation chapter.
ABB IS NOT responsible for the disposal of the equipment: displays,
cables, batteries, accumulators, etc., and therefore the customer must
dispose of these items, which are potentially harmful to the environment,
in accordance with the regulations in force in the country of installation.
The same precautions should be adopted for dismantling the equipment.
The equipment is not designed to operate in environments that are particularly inammable
or explosive.
The customer and/or installer must appropriately train operators or any-
one who may come into close proximity of the equipment, and highlight,
with notices or other means where necessary, the hazardous areas or
operations at risk: magnetic elds, hazardous voltages, high temperat-
ures, possible discharges, generic hazard, etc.
Signs and labels
The labels afxed on the equipment must strictly NOT be removed, damaged, defaced,
hidden, etc.
The labels must be regularly cleaned and kept in sight, i.e. NOT hidden
by foreign objects and parts (rags, boxes, equipment, etc.)
The technical data provided in this manual does not in any case replace
that shown on the labels afxed on the equipment.
Скачано с сайта интернет магазина https://axiomplus.com.ua/
To Next Page
Loading...
Need help?
General