EasyManuals Logo

ABB UNO-3.0-TL-OUTD-S User Manual

ABB UNO-3.0-TL-OUTD-S
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
- 31 -
000473AG
2 - Characteristics
Functionality and components of the equipment
Congurable relay
The inverter is equipped with a congurable switching relay, which can
be used in different operating congurations that can be set in the dedic-
ated menu. A typical example of application is the activation of the relay
in the event of an alarm.
Remote switch-on/switch-off
This command can be used to switch off/switch on the inverter via an
external (remote) command.
This function must be enabled in the menu and when active, switching on
the inverter, besides being dictated by the presence of normal paramet-
ers which allow the inverter to be connected to the grid, also depends on
the external command for switching on/off.
Reactive power feed into the grid
The inverter is able to produce reactive power and can feed this power
into the grid via the phase factor setting. Managing the feed can be con-
trolled directly by the grid company via a dedicated RS485 serial inter-
face or set by the display or through the conguration software, Aurora
Manager TL.
Power feeding modes vary according to the country of installation and
the grid companies. For detailed information on the parameters and
characteristics of this function, contact ABB directly.
Limiting the active power fed into the grid
The inverter, if enabled and set using the display or the Aurora Manager
conguration software, can limit the amount of active power fed into the
grid by the inverter to the desired value (expressed as a percentage).
Data transmission and control
The inverter or a network of several inverters, can also be monitored
remotely via an advanced communication system based on an RS485
serial interface. The range of optional ABB devices that can be connec-
ted to this communication line allow you to monitor the device locally or
remotely through an internet connection.
MicroSD Card
The inverter is equipped with a slot for insertion of a microSD memory
Card.
The maximum size of the microSD Card is 4 GB. Its main functionality is
allowing the inverter rmware to be updated in a few simple steps.
The most up-to-date inverter rmware version is available from the web-
site https://registration.abbsolarinverters.com
Скачано с сайта интернет магазина https://axiomplus.com.ua/

Table of Contents

Other manuals for ABB UNO-3.0-TL-OUTD-S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB UNO-3.0-TL-OUTD-S and is the answer not in the manual?

ABB UNO-3.0-TL-OUTD-S Specifications

General IconGeneral
BrandABB
ModelUNO-3.0-TL-OUTD-S
CategoryInverter
LanguageEnglish

Related product manuals