Laser Sources How to Use Laser Source Modules
110 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
How to Use Laser Source
Modules
Figure 58 Menu of Parameters for a Fixed Wavelength Laser Source
The Laser Wavelength Value
The laser wavelength value [λ] for a fixed-wavelength laser source module
is the calibrated optical wavelength value for the laser source. This is a
fixed value, you can display the value but you cannot edit it.
Dual-Wavelength Laser Source Modules
Dual-wavelength laser source modules have optical outputs at two
wavelengths. You can choose to output an optical signal at either a single
wavelength or at both wavelengths simultaneously.
To choose both output wavelengths for a dual-wavelength laser source
module:
1 Move to [λ] parameter and press Enter.
To Next Page
Loading...
Need help?
General
