Agilent Technologies Agilent 8163A User Manual

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 421
16
Cleaning Instructions
The following Cleaning Instructions contain some general safety
precautions, which must be observed during all phases of cleaning.
Consult your specific optical device manuals or guides for full information
on safety matters.
Please try, whenever possible, to use physically contacting connectors,
and dry connections. Clean the connectors, interfaces, and bushings
carefully after use.
If you are unsure of the correct cleaning procedure for your optical device,
we recommend that you first try cleaning a dummy or test device.
Agilent Technologies assume no liability for the customer’s failure to
comply with these requirements.
Cleaning Instructions for this Instrument
The Cleaning Instructions apply to a number of different types of Optical
Equipment. Table 23 lists the sections that are relevant to the various
modules that can be installed in this instrument.
Table 23 Cleaning Instructions for Modules
Modules Instruction
Optical Heads
“How to clean instruments with an optical glass plate” on
page 441
Laser Source Modules
“How to clean instruments with a physical contact interface”
on page 442
Tunable Laser Modules
“How to clean instruments with a physical contact interface”
on page 442
Return Loss Modules
“How to clean instruments with a physical contact interface”
on page 442
LED Source Modules
“How to clean instruments with a physical contact interface”
on page 442
Power Sensor Modules
“How to clean instruments with a recessed lens interface” on
page 443

Agilent Technologies Agilent 8163A Specifications

General

Brand	Agilent Technologies
Model	Agilent 8163A
Category	Multimeter
Language	English