Safety Considerations Getting Started
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 25
Safety Considerations
The following general safety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended
use of the instrument. Agilent Technologies Inc. assumes no liability for
the customer’s failure to comply with these requirements.
This product has been designed and tested in accordance with IEC
Publication 61010-1, Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory. Use, and has been supplied in a
safe condition. The instruction documentation contains information and
warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
Safety Symbols
The caution sign denotes a hazard. It calls attention to a procedure
which, if not correctly performed or adhered to, could result in
damage to or destruction of the product. Do not proceed beyond a
caution sign until the indicated conditions are fully understood and
met.
CAUTION
The warning sign denotes a hazard. It calls attention to a
procedure which, if not correctly performed or adhered to, could
result in injury or loss of life. Do not proceed beyond a warning
sign until the indicated conditions are fully understood and met.
WARNING
To Next Page
Loading...
Need help?
General
