Chapter 10 311
CDMA Digital Modulation
cdma2000 Forward Link Modulation for Component Test
Inserting Additional cdma2000 Forward Link Traffic Channels
1. Press
Edit Channel Setup.
2. Move cursor to the bottom row and press
Insert Row > Traffic > Channels > 20 > Enter.
3. Press
Done.
The channel table editor now contains the 20 additional channels. The first page displays only channels one
through nine. To see the additional channels, press the following key sequence:
Return > Goto Row > Page Up.
The display shows that the total power is now at 13.22 dB. You can rescale the total channel power to 0 dB
by pressing
Adjust Code Domain Power > Scale to 0 dB.
Press
Return. The text area displays the current configuration, FWD CDMA2000 Setup: SR1 9 Channel
(Modified), as shown in Figure 10-3.
Figure 10-3
To store a custom cdma2000 state, see “Storing a Component Test Waveform to Memory” on page 316.
To Next Page
Loading...
Need help?
General
