Use the arrow keys to
move the cursor up or
down to the item you
want to select.
SR Function
Use the LEFT and RIGHT arrow keys to
select the parameters.
Use the UP and DOWN arrow keys to set
the value for a parameter.
Variable
Monitor or set values for program-
defined variables. This feature is not yet
implemented.
I/O Status
Monitor the I/O status from this screen.
Mode Switch
Set the controller to Program Mode or
Run mode from this screen.
Advance Set
View:
System Info Input Filter
Fault Code AI Calibration
LCD Setup PwrUp Behavior
Clock Set Memory Module
Language
Security
Set or Reset the Password.
To Next Page
Loading...
Need help?
General
