Rockwell Automation Publication 520-UM001A-EN-E - February 2013 119
Programming and Parameters Chapter 3
Fault and Diagnostic Group
F604 [Fault 4 Code] Related Parameter(s): b007-b009
F605 [Fault 5 Code]
F606 [Fault 6 Code]
F607 [Fault 7 Code]
F608 [Fault 8 Code]
F609 [Fault 9 Code]
F610 [Fault10 Code]
A code that represents a drive fault. The codes appear in these parameters in the order they occur (b007 [Fault 1 Code] = the most recent fault). Repetitive faults are only recorded once.
Values Default: Read Only
Min/Max: F0/F127
Display: F0
F611 [Fault 1 Time-hr]
F613 [Fault 3 Time-hr]
F615 [Fault 5 Time-hr]
F617 [Fault 7 Time-hr]
F619 [Fault 9 Time-hr]
F612 [Fault 2 Time-hr] Related Parameter(s): d362
F614 [Fault 4 Time-hr]
F616 [Fault 6 Time-hr]
F618 [Fault 8 Time-hr]
F620 [Fault10 Time-hr]
Displays the value of d362
[Elapsed Time-hr] when the fault occurs.
Values Default: Read Only
Min/Max: 0/32767 hr
Display: 1 hr
F621 [Fault 1 Time-min]
F623 [Fault 3 Time-min]
F625 [Fault 5 Time-min]
F627 [Fault 7 Time-min]
F629 [Fault 9 Time-min]
F622 [Fault 2 Time-min] Related Parameter(s): d363
F624 [Fault 4 Time-min]
F626 [Fault 6 Time-min]
F628 [Fault 8 Time-min]
F630 [Fault10 Time-min]
Displays the value of d363
[Elapsed Time-min] when the fault occurs.
Values Default: Read Only
Min/Max: 0.0/320.0 min
Display: 0.1 min
F631 [Fault 1 Freq]
F633 [Fault 3 Freq]
F635 [Fault 5 Freq]
F637 [Fault 7 Freq]
F639 [Fault 9 Freq]
F632 [Fault 2 Freq] Related Parameter(s): b001
F634 [Fault 4 Freq]
F636 [Fault 6 Freq]
F638 [Fault 8 Freq]
F640 [Fault10 Freq]
Displays and stores the value of b001
[Output Freq] with the most recent 10 faults occurred.
[Fault 1 Freq] stores the most recent fault, [Fault 2 Freq] stores the second most recent fault and [Fault 3 Freq] stores the third most recent fault.
Values Default: Read Only
Min/Max: 0.00/500.00 Hz
Display: 0.01 Hz
To Next Page
Loading...
Need help?
General
