Allen-Bradley PowerFlex 700H Service Manual

3-14 Access Procedures
2. If moving the control frame from a DC input drive with precharge
interlock, disconnect the wiring from terminal strip X50.
3. Loosen the T8 Torx-head screws, which secure the Control Frame to the
drive enclosure.
4. Swing the Control Frame out and away from the power structure.
Installation
Install the Control Frame in reverse order of removal, while referring to
Torque Specifications on page 3-1
.
X50 Terminal Block
Loosen T8 Torx-head
screws

Allen-Bradley PowerFlex 700H Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 700H
Category	Controller
Language	English