Rockwell Automation Publication 1756-PM006I-EN-P - February 2018 9
Preface
This manual shows how to design and program Sequential Function Charts
(SFCs) for Logix 5000 controllers to execute. This manual is one of a set of related
manuals that show common procedures for programming and operating Logix
5000™ controllers.
For a complete list of common procedures manuals, refer to the
Logix 5000
Controllers Common Procedures Programming Manual, publication 1756-
PM001.
The term Logix 5000 controller refers to any controller that is based on the Logix
5000 operating system.
The Studio 5000 Automation Engineering & Design Environment® combines
engineering and design elements into a common environment. The first element is
the Studio 5000 Logix Designer® application. The Logix Designer application is
the rebranding of RSLogix 5000® software and will continue to be the product to
program Logix 5000™ controllers for discrete, process, batch, motion, safety, and
drive-based solutions.
The Studio 5000® environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. The Studio 5000
environment is the one place for design engineers to develop all elements of their
control system.
To Next Page
Loading...
Need help?
General
