17
use and maintenance Atlantic 125/250/500 Sprint
CONTROLS ON RIGHT HANDLEBAR
NOTE The electric components only operate when the ignition
switch is in the “ ” position.
1) Engine stop switch ( - )
WARNING
Do not operate the engine stop switch " - " while riding.
This switch serves as a safety or emergency switch. With the
switch pressed in position “ ”, it is possible to start the
engine; the engine can be stopped by pressing the switch to
position “ ”.
CAUTION
With the engine stopped and the ignition switch in position
“ ” , the battery may run flat.
When the vehicle has come to a standstill and you have
stopped the engine, set the ignition switch to position " ".
2) STARTER BUTTON ( )
When the starter button " " is pressed, the starter motor will
crank the engine. For the starting procedure, see page 32
(STARTING).
1
2
APRum_ATLANT125#02_##uk.book Page 17 Tuesday, March 14, 2006 5:15 PM