use and maintenance Scarabeo 500
18
CONTROLS ON THE RIGHT SIDE OF THE HANDLEBAR
NOTE The electric components work only when the ignition
switch is in position “ ”.
1) ENGINE KILL SWITCH ( - )
WARNING
Do not operate the engine kill switch “ - ” while riding.
This is a safety or emergency switch. When it is in position
“ ”, the engine can be started. When set to position “ ”, it
will stop the engine.
CAUTION
Leaving the ignition switch in position “ ” when the engine
is stopped may flatten the battery. After stopping the vehicle,
stop the engine and then turn the ignition switch to
position“ ”.
2) STARTER BUTTON ( )
When pressed, the starter button “ “, turns the engine over.
See page 34 (STARTING) for starting procedure.
Deactivation
When the key is inserted into the ignition switch and turned to
“ ”, the device is automatically disconnected.
1
2
To Next Page
Loading...
Need help?
General
