39
use and maintenance Scarabeo 500
◆ Set the engine kill switch (1) to “ ” .
CAUTION
Leaving the ignition switch in position
“ ” when the engine is stopped may
flatten the battery.
◆ Turn the key (2) and set the ignition
switch (3) to position “”.
◆ Place the vehicle on the stand, page 39
(PLACING THE VEHICLE ON THE
STAND) at the side.
CAUTION
Do not leave the key in the ignition
switch.
◆ Lock the steering, see page 19
(STEERING LOCK) and extract the key.
PLACING THE VEHICLE ON THE
STAND
Read page 38 (STOPPING) carefully.
CENTRE STAND
◆ Grasp the left grip (4) and the passenger
grab rail (5).
◆ Push down on the stand lever (6).
SIDE STAND
◆ Grasp the left grip (4) and the passenger
grab rail (5).
◆ Push the side stand (7) fully down with
your right foot.
◆ Lean the vehicle towards you until the
stand rests on the ground.
◆ Steer the handlebar fully to the left.
WARNING
Make sure that the vehicle is stable.
P
U
S
H
Z
AD
I
1
2
3
6
4
5
7
4
5
To Next Page
Loading...
Need help?
General
