use and maintenance Scarabeo 500
22
Press the MODE button repeatedly to
select in the order:
RESETTING AVERAGE AND MAXIMUM
SPEED, FUEL CONSUMPTION AND LAP
TIMER
NOTE These indications may only be
reset when the odometer is displayed on
the right digital display.
◆ Press the TRIP key (14) for more than three
seconds.
NOTE The displayed function will be reset.
LAP TIMER START/STOP AND RESET
NOTE These indications may only be
reset when the odometer is displayed on
the right digital display.
START/STOP:
Press the MODE key for more than three
seconds.
RESET:
◆ Press the TRIP key (14) for more than three
seconds only when the lap timer is stopped.
DIGITAL ODOMETER
NOTE The displays only operate when
the ignition switch is set to “ “.
When the ignition key (15) is set to “ “ ,
all segments of the display come on to test
components for proper operation. The
initial display shows the odometer.
The segments of the Display are:
Odometer display icon (16), TRIP 1 display
icon (17), TRIP 2 display icon (18), and
five-digit reading of selected indication
(19).
External temperature in ° C
MODE
Maximum speed (Vmax) + kph or mph
MODE
Average speed AVG (kph or mph)
MODE
Battery charge (Vbatt)
MODE
Fuel consumption (km/l or mi/Gal.)
MODE
Lap timer (LAP)
MODE
Kilometres till next service
(SERVICE)
MODE
14
ODO TRIP 1 TRIP 2
PUSH
ZA
D
I
15
19
16 17 18