MediaPack SIP User’s Manual 3. Installing the MediaPack
Version 4.6 39 June 2005
3.2.3 19-inch Rack Installation Package
Additional option is available for installing the MP-11x in a 19-inch rack. The 19-inch rack
installation package contains a single shelf (shown in Figure
3-12 below) and eight shelf-to-
device screws.
Figure
3-12: 19-inch Rack Shelf
3.2.4 Mounting the MP-11x
The MP-11x can be mounted on a desktop (refer to Section 3.2.4.1 below), on a wall (refer to
Section
3.2.4.2) or installed in a standard 19-inch rack (refer to Section 3.2.4.2).
Figure
3-13 below describes the design of the MP-11x base.
Figure
3-13: View of the MP-11x Base
Table
3-4: View of the MP-11x Base
Item # Functionality
1 Square slot used to attach anti-slide bumpers (for desktop mounting)
2 Oval notch used to attach the MP-11x to a wall
3 Screw opening used to attach the MP-11x to a 19-inch shelf rack
1
3
2
To Next Page
Loading...
Need help?
General
