MediaPack SIP
MediaPack SIP User’s Manual 74 Document #: LTRT-65405
Table 5-6: Supplementary Services Parameters (continues on pages 72 to 74)
Parameter Description
Stutter Tone Duration
[StutterToneDuration]
Duration (in msec) of the played stutter dial tone that indicates waiting message(s).
The default is 2000 (2 seconds). The range is 1000 to 60000.
The Stutter tone is played (instead of a regular Dial tone) when a MWI is received. The
tone is composed of a ‘Confirmation tone’ that is played for ‘StutterToneDuration’
followed by a ‘Stutter tone’. Both tones are defined in the CPT file.
Note: This parameter is applicable only to FXS gateways.
For detailed information on Message Waiting Indication (MWI), refer to Section
8.1.6 on
page 171.
5.5.2.3 Keypad Features
The Keypad Features screen (applicable only to FXS gateways) enables you to activate /
deactivate the following features directly from the connected telephone’s keypad:
• Call Forward (refer to Section
5.5.8.4 on page 104).
• Caller ID Restriction (refer to Section
5.5.8.3 on page 103).
• Hotline (refer to Section
5.5.8.2 on page 102).
¾ To configure the keypad features, take these 4 steps:
1. Open the ‘Keypad Features’ screen (Protocol Management menu > Advanced
Parameters submenu > Keypad Features option); the ‘Keypad Features’ screen is
displayed.
Figure
5-9: Keypad Features Screen
2. Configure the Keypad Features according to Table
5-7.
3. Click the Submit button to save your changes.
To Next Page
Loading...
Need help?
General
