BMW C650GT - Stand

counter-holding the nut on this
inside.
Muffler on bracket
14 lb/ft (19 Nm)
Align clip 10 with opening at
tab 9.
Tighten nut 5 to the specified
torque.
End muffler on front
muffler
14 lb/ft (19 Nm)
Place cover with bolts 4 onto
grommets 3.
Move trim 2 forward in direc-
tion of arrow parallel to the rear
silencer.
The bolts 4 are placed in the
grommets 3.
Fit the screw 1.
Calibrating ASC ( 52).
BMW Motorrad front
wheel stand
Mount front wheel stand
The base stand and its acces-
sories are available through your
authorized BMW Motorrad re-
tailer.
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Use basic stand with front
wheel mount.
8
101
z Maintenance