Press button 1 repeatedly un-
til desired heating level 2 is
shown.
The handlebar grips can be
heated manually at two levels
or automatically. The second
manual level is used for fast
heat-up of the grips; then the
switch should be switched back
to the first level. The following
displays are available:
Heater output is automat-
ically adjusted in depen-
dence on ambient temperature,
speed and engine speed.
100 % heating output
Approx. 50 % heater out-
put
Seat heating
with seat heating
OE
Operating driver's seat
heater
Start engine.
NOTICE
Seat heating can be activated
only when the engine is
running.
Press button 1 repeatedly un-
til desired heating level 2 is
shown.
The rider`s seat can be heated
at two manual levels or automat-
ically. The second manual level
is used for fast heat-up of the
seat; then the switch should be
switched back to the first level.
The following displays are avail-
able:
Heater output is automat-
ically adjusted in depen-
dence on ambient temperature,
speed and engine speed.
4
55
z
Operation
To Next Page
Loading...
