16/72 Safety instructions
BoschRexrothAG, axial piston variable pump A4VSO, RE 92050-01-X-B1/2019.08.23
CAUTION
High noise development during operation!
Danger ofhearing damage, hearing loss!
The noise emission ofaxial piston units depends onrotational speed, working
pressure and installation conditions, among other factors. The sound pressure level
may rise above 70dB (A) under normal application conditions.
▶ Always wear hearing protection near arunning axial piston unit.
Hot surfaces onaxial piston unit!
Risk ofburning!
▶ Allow theaxial piston unit tocool down sufficiently before touching it.
▶ Protect yourself with heat-resistant protective clothing, e.g. gloves.
Inappropriate routing ofcables and lines!
Risk ofstumbling and property damage!
▶ Lay cables and lines so that they cannot be damaged and nobody can trip over
them.
Contact with hydraulic fluid!
Danger tohealth / damage tohealth, e.g. eye injury, skin damage, toxication inthe
event ofinhalation!
▶ Avoid any contact with hydraulic fluids.
▶ When handling hydraulic fluids, thesafety instructions ofthelubricant
manufacturer need tobe observed atall times.
▶ Use your personal protective equipment (e.g. safety goggles, safety gloves,
suitable working clothes, safety shoes).
▶ Immediately seek medical attention, however, ifhydraulic fluid gets into your
eyes orblood circuit orif you swallow itaccidentally.
Escaping hydraulic fluid due tomachine/system leakage!
Risk ofburning and risk ofinjury due toescaping hydraulic fluid jet!
▶ Depressurize the machine/system and repair the leak.
▶ Never attempt toblock orseal the leak orhydraulic fluid jet with acloth.
2.7 Personal protective equipment
Personal protective equipment istheresponsibility oftheuser oftheaxial piston
unit. Observe thesafety regulations inyour country.
All pieces ofpersonal protective equipment should beintact.
To Next Page
Loading...
Need help?
General
