Bosch rexroth A4VSO 10 Series User Manual

Installation 37/72
RE 92050-01-X-B1/2019.08.23, Axial piston variable pump A4VSO, BoschRexrothAG
3. Before installing, completely drain theaxial piston unit toprevent mixing with
thehydraulic fluid used inthe machine/system.
L
1
R
Fig. 9: Direction ofrotation
L
Counter-clockwise
R
Clockwise
4. Check the direction of rotation of the axial piston unit (on the name plate) and
make sure that this corresponds to the direction of rotation of the drive shaft at
the drive motor.
5. Check the swivel angle indicator (1) on the axial piston unit.
Fig. 10: Swivel angle indicator
If swivel angle "0" is not indicated at the swivel angle indicator, hydraulic fluid is
pumped by the axial piston unit immediately after activation.
The direction ofrotation asindicated onthe name plate determines thedirection
ofrotation oftheaxial piston unit asviewed onthe drive shaft; see chapter 5.3
"Product identification" onpage 23. For information onthe direction ofrotation
ofthedrive motor, please refer tothe drive motor manufacturer's instruction
manual.
7.4.2 Dimensions
The installation drawing contains the dimensions for all connections and ports
on the axial piston unit. Also observe themanuals provided bythemanufacturers
oftheother hydraulic components when selecting therequired tools.

Bosch rexroth A4VSO 10 Series Specifications

General

Brand	Bosch
Model	rexroth A4VSO 10 Series
Category	Water Pump
Language	English