26/72 Transport and storage
BoschRexrothAG, axial piston variable pump A4VSO, RE 92050-01-X-B1/2019.08.23
6 Transport and storage
DANGER
Risk of explosion by explosive atmosphere!
Static discharges and sparking resulting from material contact in an explosive
atmosphere may cause explosions that can result in serious injury or even death.
▶ Do not transport or store the axial piston unit in potentially explosive areas.
▶ Do not unpack or pack the axial piston unit in potentially explosive areas.
CAUTION
Risk of damage!
Striking or impact forces could damage the axial piston unit.
▶ Do not strike the coupling or drive shaft of the axial piston unit.
▶ Do not set/place the axial piston unit on the drive shaft.
▶ Do not strike sensitive assembled parts (e.g., sensors or valves).
▶ Do not strike sealing surfaces (e.g., on the suction port or through drive).
▶ Always observe thenecessary ambient conditions for transport and storage;
seechapter 6.2 "Storing theaxial piston unit" onpage 28.
Information onunpacking can befound inchapter 7.1 "Unpacking" onpage 30.
6.1 Transporting theaxial piston unit
The following optional means oftransport can beapplied depending onthe weight
and duration oftransport:
• Transporting byhand (chapter not relevant for this axial piston unit)
• Transporting with alifting device (eye bolt orlifting strap)
Table 10: Dimensions and weights
Size 40 71 125 180 250 355 500
Weight kg 39 53 88 102 184 207 320
Width mm Dimensions vary byequipment. The values applicable for your axial piston
unit can befound inthe installation drawing (request ifnecessary).
Height mm
Depth mm
Weight may vary byequipment.
Dimensions and weights