ctrlX SAFETY "SafeMotion"
Antriebsregelgeräte may only be operated under the assembly and installation
conditions specified in this documentation, in the specified position of normal
use and under the specified ambient conditions (temperature, degree of pro-
tection, humidity, EMC, etc.).
3.2 Unintended use
"Unintended use" refers to using the Antriebsregelgeräte outside of the oper-
ating conditions, technical data and specifications described in this documen-
tation.
●
Antriebsregelgeräte must not be used if they are exposed to operating con-
ditions that do not meet the specified ambient conditions. This includes, for
example, operation under water, under extreme temperature fluctuations or
extreme maximum temperatures.
●
Furthermore, Antriebsregelgeräte may not be used in applications that have
not been expressly authorized by Rexroth. Please refer to the specifications
in the general safety instructions!
Components of the ctrlX DRIVE drive system are products of category 3 (with
limited availability) according to IEC 61800-3. This category comprises EMC
limit values for conducted and radiated emission. To comply with this category
(limit values), use appropriate measures to suppress inteferences in the drive
system (e.g., mains filters, shielding measures).
These components are not intended for use in a public low voltage system for
residential areas. If these components are operating in such a network, high
frequency interferences are to be expected. Additional measures for interfer-
ence suppression can be required.
To Next Page
Loading...
Need help?
General
