ctrlX SAFETY "SafeMotion"
4 Safety instructions for electric drive and
control systems
4.1 Basic information
4.1.1
Using and passing on the safety instructions
Do not install and operate any components of the electric drive and control
system before carefully reading all provided documents. These safety instruc-
tions and all other user instructions have to be read prior to working with these
components. If you do not have the user documentation for the components,
contact our Rexroth sales representative. Request the immediate delivery of
these documents to the person or persons in charge of the safe operation of
the components.
In the case of vending, rental and/or distribution of the components in any
other form, include these safety instructions in the national language of the
user.
Improper use of these components, failure to follow the safety instructions
in this document or tampering with the product, including disabling of safety
devices, could result in property damage, personal injury, electric shock or
even death.
4.1.2
Requirements for safe use
Prior to initial commissioning of the components of the electric drive and con-
trol system, read the following instructions to avoid personal injury and/or
property damage. You must comply with these safety instructions.
● In the case of damage due to non-compliance with the safety instructions,
Rexroth shall not assume any liability.
● Prior to commissioning, read the operating, maintenance and safety instruc-
tions. If you are not able to sufficiently understand the language used in the
application documentation, please contact and inform your vendor.
●
Appropriate and professional transport, storage, assembly and installation,
as well as thorough operation and maintenance, are the basis of correct and
safe operation of the component.
●
Only qualified personnel may use components of the electric drive and con-
trol system or work in its close proximity.
●
Only use accessories and spare parts approved by Rexroth.
● Comply with the safety instructions and regulations of the country in which
the components of the electric drive and control system are operated.
● Only use components of the electric drive and control system as intended.
Please refer to chapter Intended use.
● The ambient and operating conditions specified in this application docu-
mentation have to be complied with.
● Applications for functional safety are only allowed if they are explicitly
and unambiguously specified in the application documentation "Integrated
Safety Technology". If this is not the case, these applications are excluded.
Functional safety includes parts of the overall safety in which measures of
risk reduction for personal safety depend on electric, electronic or program-
mable controls.
●
The specifications contained in the application documentation regarding the
use of the provided components are only application examples and recom-
mendations.
Safety instructions for electric
drive and control systems
To Next Page
Loading...
Need help?
General
