2-33
Confidential
îš„ Error code 1E00
The number of rotations of the drum unit is reaching the life limit.
îš„ Error codes 1F00 to 2300
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
îš„ Error code 2400
An error occurred in the internal temperature thermistor.
îš„ Error codes 2500 to 3500
These errors do not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
Replace Parts
Drum
Step Cause Remedy
1
Replace the drum unit with a
new one and reset the drum
counter. If the error display is
not cleared, the main PCB is
faulty.
Replace the main PCB ASSY.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable 24
Turn the power off and then back on again.
Step Cause Remedy
1
Connection failure of the
internal temperature thermistor
harness
Reconnect the internal temperature thermistor
harness.
2
Internal temperature thermistor
failure
Replace the Internal temperature thermistor.
3 Main PCB failure Replace the main PCB ASSY.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General