5-10
Confidential
1.3.3 ADF Performance Test (Maintenance mode 08)
< Function >
The function counts the documents fed by the automatic document feeder (ADF) and
displays the count on the LCD for checking the ADF performance.
< Operating Procedure >
(1) Set documents on the ADF unit.
The "Doc. Ready" appears on the LCD.
(2) Press the 0 and 8 keys in this order in the initial stage of the maintenance mode.
The machine feeds the documents in and out while counting them and displaying
"
ADF CHECK P.**" on the LCD. (** shows the current count).
(3) Press the X key to return the machine to the initial stage of the maintenance mode.
Note: If no document is set on the ADF, the machine displays "NO DOCUMENT" on
the LCD and returns to the initial stage of the maintenance mode.
To Next Page
Loading...
Need help?
General
