5-49
Confidential
1.3.28 Print of the Maintenance Information (Maintenance mode 77)
< Function >
The machine prints out its log information or saves it into a USB flash memory.
< Operating Procedure >
Printing
(1) Press the 7 key twice in the initial stage of the maintenance mode.
The machine prints out the maintenance information.
(2) Upon completion of the printing, the machine returns to the initial stage of the
maintenance mode.
Saving into a USB flash memory
(1) Insert a USB flash memory into the memory slot in the initial stage of the
maintenance mode.
The "****Active" or "?" appears on the LCD (where "****" is the name of the
inserted USB flash memory).
(2) Press the 7 key twice to display "Print out" on the LCD.
(3) Press the â–² or â–¼ key to select "Save Data."
(4) Press the Mono Start key.
The LCD shows "******" (where "******" is "Model name + Lower 9 digits of the
machine’s serial number").
(5) Upon completion of the saving, the machine returns to the initial stage of the
maintenance mode.
Note: When recording paper runs out during printing, the maintenance mode goes
back to the initial state, therefore, be sure to load recording paper in the
paper tray before executing printing.
To Next Page
Loading...
Need help?
General
