Cisco 2911 Configuration Guide

3
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Overview of the Hardware and Software
Feature Information
New Modules and
Interface Cards
Cisco 3900 series, 2900 series, and 1900 series ISRs introduce the
following new modules and interface cards, which are inserted in the
following new router slots:
• EHWIC
• PVDM3
• ISM
• SM
Note See the router’s product page at Cisco.com for a complete list of
supported modules and interfaces.
Multi-Gigabit Fabric
Communication
Cisco 3900 series, Cisco 2900 series, and Cisco 1900 series ISRs use a
MGF
4
for the new modules and interface cards to inter-communicate on
the router. Legacy modules that support Cisco HIMI
5
also support MGF
to inter-communicate on the router. Next generation module drivers
integrate with the MGF to perform port configurations, configure packet
flow, and control traffic buffering. All configurations are performed from
the module-side, which may or may not lead to changes on the MGF. For
more information, see the “Configuring Multi-Gigabit Fabric
Communication” section on page 211.
Integrated Application
Services Features
Cisco 3900 series, 2900 series, and 1900 series ISRs offer integrated
security features and voice features.
• See the “Configuring Security Features” section on page 127
• See the “Unified Communications on Cisco Integrated Services
Routers” section on page 169
1. SPE = Services Performance Engine
2. USB = universal serial bus
3. CF = CompactFlash
4. MGF = multi-gigabit fabric
5. HIMI = High-Speed Intrachassis Module Interconnect
Table 1 Feature Information (continued)
Feature Description

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g