EasyManuals Logo
Home>Cisco>Network Router>2911

Cisco 2911 Configuration Guide

Cisco 2911
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
177
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Unified Communications on Cisco Integrated Services Routers
IP Media Services
IP Media Services
The Cisco 3900 series and Cisco 2900 series ISRs support the following media services:
Conferencing, Transcoding and Media Termination Point (MTP), page 177
RSVP Agent, page 177
Trusted Relay Point (TRP), page 177
Conferencing, Transcoding and Media Termination Point (MTP)
Cisco Enhanced Conferencing and Transcoding for Voice Gateway Routers provides conferencing and
transcoding capabilities in Cisco IOS Software-based gateways using the onboard Cisco Packet
Voice/Fax Digital Signal Processor Modules on the Cisco voice gateway routers. This capability is also
supported on Cisco voice gateway router platforms using the Cisco IP Communications Voice/Fax
Network Module and the Cisco IP Communications High-Density Digital Voice/Fax Network Module.
This feature is delivered in Cisco IOS Software and operates in conjunction with Cisco CallManager.
See Configuring Enhanced Conferencing and Transcoding for Voice Gateway Routers at Cisco.com for
configuration information, http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html.
RSVP Agent
The RSVP Agent feature implements a Resource Reservation Protocol (RSVP) agent on Cisco IOS voice
gateways that support Cisco Unified Communications Manager Version 5.0.1. The RSVP agent enables
Cisco Unified Communications Manager to provide resource reservation for voice and video media to
ensure QoS and call admission control (CAC). Cisco Unified Communications Manager controls the
RSVP agent through Skinny Client Control Protocol (SCCP). This signaling is independent of the
signaling protocol used for the call so SCCP, SIP, H.323, and MGCP calls can all use the RSVP agent.
Benefits of this feature include the following:
Improves flexibility and scalability of bandwidth management in a meshed network by
decentralizing call admission control
Provides method of managing unpredictable bandwidth requirements of video media
Enables RSVP across WAN for Cisco IP phones and other devices that do not support RSVP
See Configuring the RSVP Agent at Cisco.com for information,
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/int_rsvp.html.
Trusted Relay Point (TRP)
The Cisco Unified Communications system can be deployed in a network virtualization environment.
Cisco Unified Communications Manager enables the insertion of trusted relay points (TRPs). The
insertion of TRPs into the media path constitutes a first step toward VoIP deployment within a virtual
network.
See Media Resource Management at Cisco.com for more information,
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmsys/
a05media.html#wp1056492.

Table of Contents

Other manuals for Cisco 2911

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 2911 and is the answer not in the manual?

Cisco 2911 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Routing protocolsBGP, EIGRP, OSPF
Supported protocolsIPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version2.0
RS-232 ports1
Expansion slots4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity2
Ethernet LAN (RJ-45) ports3
Firewall securityCisco IOS
Input current2.2 A
AC input voltage100 - 240 V
Power source typeAC
AC input frequency47 - 63 Hz
Power consumption (typical)50 W
Product colorBlack
Rack capacity2U
Operating altitude0 - 4000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-40 - 80 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 85 %
SafetyUL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1
Weight and Dimensions IconWeight and Dimensions
Depth304.8 mm
Width438.2 mm
Height88.9 mm
Weight8200 g

Related product manuals