Cisco 2911 Configuration Guide

4
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Overview of the Hardware and Software
New Features by Platform
New Features by Platform
Table 2 shows new feature support by platform.
New Slots
Cisco 3900 series, 2900 series, and 1900 series ISRs have introduced new slots on the chassis. The first
column in Table 3 lists the new slot names. The second column lists the corresponding old slot names.
Modules previously inserted in the old slots now insert in the new slots with the help of an adapter card.
For instance, network modules (NMs), enhanced network modules (NMEs), and extension voice
modules (EVMs) use an adapter, or carrier card, to insert into the SM slot. See your router’s hardware
installation guide for adapter information.
Table 2 New Features in this Release by Platform
Features 1941 1941W 2901 2911 2921 2951 3925 3925E 3945 3945E
Services Performance Engine N N N N N N Y Y Y Y
Cryptographic Engine
Acceleration
N N N N N N Y
1
1. Must have Services Performance Engine 200 installed in the router.
Y Y
2
2. Must have Services Performance Engine 250 installed in the router.
Y
USB Serial Console Y Y Y Y Y Y Y Y Y Y
Power Management Y Y Y Y Y Y Y Y Y Y
New Module and Interface Card
Features
YY Y Y YYYYYY
Advanced Capability
CompactFlash
YY Y Y YYYYYY
SFP/Gigabit Ethernet Port N N N N Y Y Y Y Y Y
Multi-Gigabit Fabric
Communication
YY Y Y YYYYYY
Integrated Application Services Y
3
3. Does not support Voice application services.
Y
4
4. Does not support Voice application services. Includes embedded wireless access point that supports Cisco Unified Wireless Architecture.
Y Y YYYYYY
Table 3 New Slot Names and Old Slot Names
New Slot Names Old Slot Names
EHWIC HWIC,HWIC-DW, WIC, VWIC, VIC
ISM AIM
1
1. AIM is not supported in this release. See your hardware installation guide for more information.
PVDM3 PVDM
SM NM, NME, EVM
SPE
2
2. The SPE is available only on the Cisco 3900 series ISRs.
—

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g