Name: Cisco 2911
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide

Chapter Configuring Ethernet Virtual Connection Bridge Domain

Connectivity Fault Management (CFM) over EVC BD

Provisioning Service (CE-A)

Perform this task to set up service for Ethernet CFM. Optionally, when this task is completed, you may

configure and enable the cross-check function. To perform this optional task, see "Configuring and

Enabling the Cross-Check Function (CE-A)".

SUMMARY STEPS

Step 1 enable

Step 2 configure terminal

Step 3 ethernet cfm domain domain-name level level-id

Step 4 service {ma-name | ma-num | vlan-id vlan-id | vpn-id vpn-id} [port | vlan vlan-id [direction down]]

Step 5 continuity-check [interval time | loss-threshold threshold | static rmep]

Step 6 continuity-check [interval time | loss-threshold threshold | static rmep]

Step 7 continuity-check [interval time | loss-threshold threshold | static rmep]

Step 8 exit

Step 9 mep archive-hold-time minutes

Step 10 exit

Step 11 ethernet cfm global

Step 12 ethernet cfm ieee

Step 13 ethernet cfm traceroute cache

Step 14 ethernet cfm traceroute cache size entries

Step 15 ethernet cfm traceroute cache hold-time minutes

Step 16 interface type number

Step 17 ethernet cfm mep domain domain-name mpid mpid {port | vlan vlan-id}

Step 18 ethernet cfm mep domain domain-name mpid mpid {port | vlan vlan-id}

Step 19 end

DETAILED STEPS

Command Purpose

Step 1

enable

Example:

Router> enable

Enables the privileged EXEC mode.

Enter your password when prompted.

Step 2

configure terminal

Example:

Router# configure terminal

Enters the global configuration mode.

Other manuals for Cisco 2911

Manual10 pages

Questions and Answers:

Need help?

Do you have a question about the Cisco 2911 and is the answer not in the manual?

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1