Cisco 2911 Configuration Guide

214
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Multi-Gigabit Fabric Communication
Viewing Platform Information
Viewing Platform Information
The following sections explain how to view VLAN, slot, module, interface card, and MGF statistics on
the router.
• Viewing VLAN and Slot Assignments, page 214
• Viewing Module and Interface Card Status on the Router, page 214
• Viewing Multi-Gigabit Fabric Statistics, page 215
Viewing VLAN and Slot Assignments
Slots on the router are optionally assigned to VLANs. From privileged EXEC mode, enter the show
platform mgf command, then press Enter to display VLAN and slot assignments on the router. An
asterisk next to the slot indicates that the vlan is the slot's default VLAN. The following example
displays output from a Cisco 3945 ISR.
Note VLAN1 is the default when no other VLAN are listed.
Router# show platform mgf
VLAN Slots
------------------------------------------------------------
1 ISM*, EHWIC-0*, EHWIC-1*, EHWIC-2*, EHWIC-3*
PVDM-0*, PVDM-1*, PVDM-2*, PVDM-3*, SM-1*
SM-2*, SM-3*, SM-4*
Viewing Module and Interface Card Status on the Router
Multi-gigabit Fabric (MGF) displays module and interface card details. To show the details of the MGF,
use the show platform mgf command in privileged EXEC mode.
The following example displays the output for the show platform mgf module command when entered
on a Cisco 3945 ISR. Table 1 on page 215 displays the information code that appears in the output.
Router# show platform mgf module
Registered Module Information
Code: NR - Not Registered, TM - Trust Mode, SP - Scheduling Profile
BL - Buffer Level, TR - Traffic Rate, PT - Pause Threshold
slot vlan type/ID TM SP BL TR PT
---- ---- ---------- ------- --- ------ ----- ----
ISM NR
EHWIC-0 NR
EHWIC-1 NR
EHWIC-2 NR
EHWIC-3 NR
PVDM-0 NR
PVDM-1 NR
PVDM-2 NR
PVDM-3 NR
SM-1 1 SM/6 UP 1 high 1000 high
SM-2 1 SM/6 UP 1 high 1000 high
SM-3 NR
SM-4 NR

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g