EasyManuals Logo
Home>Cisco>Network Router>2911

Cisco 2911 Configuration Guide

Cisco 2911
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
161
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Identity Features on Layer 3 Interface
Controlling Port Authorization State
Status: Authz Success
Domain: DATA
Oper host mode: single-host
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 030303030000000A002CFCBC
Acct Session ID: 0x0000000D
Handle: 0x7C00000B
Runnable methods list:
Method State
dot1x Authc Success
c1921#show dot1x interface g0/1
Dot1x Info for GigabitEthernet0/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = FORCE_AUTHORIZED
ControlDirection = Both
HostMode = SINGLE_HOST
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 30
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
c1921#show authentication sessions
Interface MAC Address Method Domain Status Session ID
Gi0/1 (unknown) dot1x DATA Authz Failed 0303030300000009002AB7FC
c1921#show authentication sessions interface gi0/1
Interface: GigabitEthernet0/1
MAC Address: Unknown
IP Address: Unknown
Status: Authz Failed
Domain: DATA
Oper host mode: single-host
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0303030300000009002AB7FC
Acct Session ID: 0x0000000C
Handle: 0x8B00000A
Runnable methods list:
Method State
dot1x Authc Failed
c1921#show dot1x interface g0/1
Dot1x Info for GigabitEthernet0/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = FORCE_UNAUTHORIZED
ControlDirection = Both
HostMode = SINGLE_HOST
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 30
ReAuthMax = 2

Table of Contents

Other manuals for Cisco 2911

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 2911 and is the answer not in the manual?

Cisco 2911 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Routing protocolsBGP, EIGRP, OSPF
Supported protocolsIPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version2.0
RS-232 ports1
Expansion slots4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity2
Ethernet LAN (RJ-45) ports3
Firewall securityCisco IOS
Input current2.2 A
AC input voltage100 - 240 V
Power source typeAC
AC input frequency47 - 63 Hz
Power consumption (typical)50 W
Product colorBlack
Rack capacity2U
Operating altitude0 - 4000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-40 - 80 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 85 %
SafetyUL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1
Weight and Dimensions IconWeight and Dimensions
Depth304.8 mm
Width438.2 mm
Height88.9 mm
Weight8200 g

Related product manuals