Enter this command:To do this:
show hardwareView information about system components, storage devices and network
interfaces
View Card Information and Statistics
show card diag slot/port
View diagnostics for all cards or for a card in a specific slot/port; (for VPC,
slot = VM)
show card info slot/port
View detailed information for all cards or a card in a specific slot/port (for
VPC, slot = VM)
show card tableView operating status for all cards or VMs
show cloud configurationView the contents of the boot configuration (param.cfg) file
[VPC-DI]
show cloud hardwareView information about installed hardware and whether it is optimal or not
for a specific card or all cards in the system
[VPC-DI]
show cloud monitor di-networkView monitored statistics about the VPC-DI network relative to a specific
card
[VPC-DI]
The commands or keywords/variables that are available are dependent on platform type, product version,
and installed license(s).
Important
Some commands have different outputs depending on the platform type.Important
Monitoring ASR 5500 Hardware Status
Use the commands contained in this section to monitor the status of the hardware components in the chassis.
For output descriptions for most of the commands, refer to the Statistics and Counters Reference.
The commands or keywords and variables are dependent on platform type, product version, and installed
license(s). Some commands produce different outputs, depending on the platform type.
Important
ASR 5500 System Administration Guide, StarOS Release 21.4
151
Monitoring the System
Monitoring ASR 5500 Hardware Status
To Next Page
Loading...
Need help?
General
