•
Notifications
•
Notification failures
•
Trigger failures
•
Replay failures
•
NETCONF notification failures
•
Unexpected failures
YANG Models
The following YANG files are available in the StarOS installation:
•
cisco-staros-bulkstats-config.yang - StarOS native bulkstats configuration model.
•
cisco-staros-bulkstats-schema-types.yang - An extension to the cisco-staros-bulkstats-config.yang
model that contains an enumerated list of schema names pulled directly from the code.
•
cisco-staros-bulkstats.yang - Operational data model that enables customers to obtain bulk statistics
via the RESTful interface. Only users with admin credentials may use this model.
•
cisco-staros-cli-config.yang - Obsolete CLI-centric model introduced in StarOS release 20.2; model
no longer supported.
•
cisco-staros-confd-config.yang - Native server ConfD configuration model.
•
cisco-staros-config.yang - Container yang file used to include all other cisco-staros-* configuration
models (all native models are included here under a common namespace).
•
cisco-staros-exec.yang - Model to enable CLI exec operations via the restful interface. Only users with
admin credentials may use this model. Used by ConfD locally to parse input.
•
cisco-staros-notif.yang - Model to enable NETCONF notification streams for StarOS event logging.
Debug level events are not supported; only informational messages and above are supported.
The ConfD server must be started at least once before these YANG files are populated and available.Important
YANG files must be pulled to the Cisco NSO to build StarOS Network Element Drivers (NEDs).
To copy YANG files, enter commands similar to the following:
#copy /hd-raid/confd_dir/etc/confd/cisco-staros-confd-config.yang
sftp://<user>:<password>@<host>/sftp-directory/cisco-staros-confd-config.yang
Show Support Details (SSD)
The output of all show confdmgr commands has been added to the SSD.
ASR 5500 System Administration Guide, StarOS Release 21.4
425
NETCONF and ConfD
YANG Models
To Next Page
Loading...
Need help?
General
