Cisco ASR 5500 User Manual

◦
time-limit seconds: Specifies that hexdump records are to be deleted from the hard drive upon
reaching a time limit defined in seconds.
seconds must be an integer from 600 through 2592000.
◦
max-files max_records: Specifies the maximum number of files to purge. If configured to 0, all
records will be purged until the limit is reached.
max_records must be an integer that is of value 0, or from 1000 through 10000.
•
Use the push-interval intervalkeyword to specify the transfer interval (in seconds) when hexdump files
will be pushed to an external file server.
◦
interval must be an integer from 30 through 3600.
◦
Default: 60
•
Use the push-trigger space-usage-percent trigger_percent to specify the disk space utilization percentage
threshold at which an automatic push is triggered and files are transferred to the external server.
◦
trigger_percent must be an integer from 10 through 80.
◦
Default: 80
•
Use the remove-file-after-transfer keyword to specify that the system must delete hexdump files after
they have been transferred to the external file server.
Default: Disabled.
This keyword must be enabled for hexdump records.Important
•
Use the transfer-mode { pull [ module-only ] | push primary { encrypted-url | url } url [ secondary
{ encrypted-secondary-url | secondary-url } secondary_url ] [ via local-context ] [ max-files files ]
[ max-tasks max_tasks ] [ module-only ] } keywords to specify the transfer mode to be used when
transferring hexdump files to an external file server
◦
pull: Specifies that the destination server (L-ESS) will pull the hexdump files.
◦
push: Specifies that the system will push hexdump files to the destination server. This is the default
mode.
◦
primary encrypted-url url: Specifies the primary URL location to which the system pushes the
files in encrypted format.
url must be an alphanumeric string of 1 through 8192 characters.
◦
primary url url: Specifies the primary URL location to which the system pushes the hexdump
files.
url must be an alphanumeric string of 1 through 1024 characters in the format:
//user:password@host:[port]/direct.
◦
secondary encrypted-secondary-url secondary_url: Specifies the secondary URL location to
which the system pushes the files in encrypted format.
secondary_url must be an alphanumeric string of 1 through 8192 characters.
ASR 5500 System Administration Guide, StarOS Release 21.4
232
Packet Capture (PCAP) Trace
Configuring the Hexdump Module

Cisco ASR 5500 Specifications

General

Brand	Cisco
Model	ASR 5500
Category	Network Router
Language	English