EasyManuals Logo
Home>Cisco>Network Router>ASR 5500

Cisco ASR 5500 User Manual

Cisco ASR 5500
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #413 background imageLoading...
Page #413 background image
256 loopback interfaces
IP Addresses and IP Address Pools
Up to 2,000 IPv4 address pools can be configured within a single context.
Prior to Release 15.0: Up to 32 IPv6 pools can be configured within a single context.
For Release 15.0 and higher: Up to 256 IPv6 pools can be configured within a single context.
Up to a combined total of 5,000 IPv4 and IPv6 addresses can be configured per chassis.
Each context supports up to 32,000,000 static IP pool addresses. You can configure a maximum
total of 96,000,000 static IP pool addresses per chassis. Each static IP pool can contain up to
500,000 addresses.
Each context supports up to 16,000,000 dynamic IP pool addresses. You can configure a maximum
total of 32,000,000 dynamic IP pool addresses per chassis. Each dynamic IP pool can contain up
to 500,000 addresses.
The actual number of IP Pools supported per context and chassis depends on how many
addresses are being used and how they are subnetted.
Important
Each address in the pool requires approximately 60 bytes of memory. The amount of
memory required, however, depends on a number of factors such as the pool type, and
hold-timer usage. Therefore, in order to conserve available memory, you may need to
limit the number of pools depending on the number of addresses to be configured and
the number of installed application cards.
Important
The maximum number of simultaneous subscriber sessions is controlled by the installed capacity license
for the service(s) supported.
The maximum number of static address resolution protocol (ARP) entries per context is 128.
The maximum number of domains per context is 2,048.
ASN-GW services configured within the same context cannot communicate with each other.
Routes
Up to 1,200 static routes per context (48,000 per chassis).
6,000 pool routes per context (6,000 per chassis)
Releases prior to 18.5: 5,000 pool explicit host routes per context (6,000 per chassis)
Release 18.5 and higher: 24,000 pool explicit host routes per context (24,000 per chassis)
64 route maps per context
BGP
Releases 12 and 14: 16,000 BGP prefixes can be learned/advertised per context (64,000 per chassis)
Releases 15 and 16: 32,000 BGP prefixes can be learned/advertised per context (64,000 per chassis)
ASR 5500 System Administration Guide, StarOS Release 21.4
381
Engineering Rules
Context Rules

Table of Contents

Other manuals for Cisco ASR 5500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 5500 and is the answer not in the manual?

Cisco ASR 5500 Specifications

General IconGeneral
BrandCisco
ModelASR 5500
CategoryNetwork Router
LanguageEnglish

Related product manuals