1-109
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
qos-config scheduling-mode min-bw-guarantee
qos-config scheduling-mode min-bw-guarantee
To configure the Quality of Service (QoS) Scheduler, use the qos-config scheduling-mode
min-bw-guarantee command in the interface configuration mode in which the queuing policy is
configured. To remove this configuration, use the no form of this command. We recommend that you use
the qos-config scheduling-mode min-bw-guarantee command for optical ports.
qos-config scheduling-mode min-bw-guarantee
no qos-config scheduling-mode min-bw-guarantee
Syntax Description
Command Default None
Command Modes Interface configuration (config-if) #
Command History
Usage Guidelines This command allows the per-class rate to use unutilized bandwidth, if any, in addition to the minimum
guaranteed bandwidth that is configured.
Examples The following example shows how to use the qos-config scheduling-mode min-bw-guarantee
command:
Router # configure terminal
Router(config) # interface gigabitethernet0/8
Router(config-if) # qos-config scheduling-mode min-bw-guarantee
Related Commands
min-bw-guarantee Assures minimum bandwidth guarantee.
Release Modification
15.2(2)SNG This command was introduced on the Cisco ASR 901 Routers.
Command Description
interface gigabitethernet Selects a particular Gigabit Ethernet interface for configuration.