1-184
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show rep topology
show rep topology
Use the show rep topology User EXEC command to display Resilient Ethernet Protocol (REP) topology
information for a segment or for all segments, including the primary and secondary edge ports in the
segment.
show rep topology [segment segment_id] [archive] [detail] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines The output of this command is also included in the show tech-support privileged EXEC command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1 Pri Alt
sw3_multseg_3400 Gi0/13 Open
sw3_multseg_3400 Gi0/14 Alt
sw4_multseg_3400 Gi0/13 Open
sw4_multseg_3400 Gi0/14 Open
sw5_multseg_3400 Gi0/13 Open
sw5_multseg_3400 Gi0/14 Open
sw2_multseg_3750 Gi1/1/2 Open
sw2_multseg_3750 Gi1/1/1 Open
sw1_multseg_3750 Gi1/1/2 Sec Open
segment-id (Optional) Display REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Display the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Display detailed REP topology information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.