Cisco ASR 901 User Manual

1-185
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show rep topology
This is a sample output from the show rep topology command when the edge ports are configured to
have no REP neighbor:
Switch # show rep topology
REP Segment 2
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw8-ts8-51 Gi0/2 Pri* Open
sw9-ts11-50 Gi1/0/4 Open
sw9-ts11-50 Gi1/0/2 Open
sw1-ts11-45 Gi0/2 Alt
sw1-ts11-45 Po1 Open
sw8-ts8-51 Gi0/1 Sec* Open
This example shows output from the show rep topology detail command:
Router# show rep topology detail
REP Segment 2
repc_2_24ts, Fa0/2 (Primary Edge)
Alternate Port, some vlans blocked
Bridge MAC: 0019.e714.5380
Port Number: 004
Port Priority: 080
Neighbor Number: 1 / [-10]
repc_3_12cs, Gi0/1 (Intermediate)
Open Port, all vlans forwarding
Bridge MAC: 001a.a292.3580
Port Number: 001
Port Priority: 000
Neighbor Number: 2 / [-9]
repc_3_12cs, Po10 (Intermediate)
Open Port, all vlans forwarding
Bridge MAC: 001a.a292.3580
Port Number: 080
Port Priority: 000
Neighbor Number: 3 / [-8]
repc_4_12cs, Po10 (Intermediate)
Open Port, all vlans forwarding
Bridge MAC: 001a.a19d.7c80
Port Number: 080
Port Priority: 000
Neighbor Number: 4 / [-7]
repc_4_12cs, Gi0/2 (Intermediate)
Alternate Port, some vlans blocked
Bridge MAC: 001a.a19d.7c80
Port Number: 002
Port Priority: 040
Neighbor Number: 5 / [-6]
<output truncated>

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English