Cisco ASR 901 User Manual

1-15
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
asr901-platf-multicast enable
asr901-platf-multicast enable
To enable multicast on the Cisco ASR 901 series routers, use the asr901-platf-multicast enable
command. Use the no form of the command to disable multicast.
asr901-platf-multicast enable
no asr901-platf-multicast enable
Syntax Description This command has no arguments or keywords.
Command Default This command is enabled by default.
Command Modes Global configuration (config)#
Command History
Usage Guidelines This command is used to enable platform multicast on a Cisco ASR 901 series router.
Examples This example shows how to enable multicast on a Cisco ASR 901 series router:
Router# configure terminal
Router(config)# ip multicast-routing
Router(config)# asr901-platf-multicast enable
Related Commands
Release Modification
15.4(1)S This command was introduced on the Cisco ASR 901 Series Aggregation
Services Routers.
Command Description
show asr901
multicast-support
Displays the platform support for IPv4 or IPv6 multicast on the Cisco ASR
901 series routers.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English