Cisco ASR 901 User Manual

1-82
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
network-clock set lockout
network-clock set lockout
To lock out a clock source, use the network-clock set lockout command. Use the network-clock clear
lockout form of the command to remove the lockout.
network-clock set lockout {interface interface_name slot/port | external slot/card/port}
network-clock clear lockout
Syntax Description
Command Modes Global configuration
Command History
Usage Guidelines The network-clock set lockout command locks out a clock source. A clock source flagged as lock-out
is not selected for SyncE.
To clear the lock-out on a source, use network-clock clear lockout {interface interface_name slot/port
| external slot/card/port} command.
Note Lockout takes precedence over force switch and force switch overrides the manual switch.
Examples This example shows how to lockout the clock source.
Router(config)#network-clock set lockout interface GigabitEthernet 0/1
interface_name Specifies the interface name.
external specifies the external interface name.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English