Cisco ASR 901 User Manual

1-71
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
network-clock external hold-off
network-clock external hold-off
To override hold-off timer value for external interface, use the network-clock external hold-off
command. Use the no form of the command to disable the configuration.
network-clock external <slot/card/port> hold-off {0 | <50-10000>}
no network-clock external <slot/card/port> hold-off {0 | <50-10000>}
Syntax Description
Command Modes Global configuration
Command History
Usage Guidelines The ASR 901 router displays a warning message for values above 1800 ms, as waiting longer causes the
clock to go into the holdover mode.
Examples This example specifies the hold-off timer value for the external interface.
Router(config)#network-clock external 3/1/1 hold-off 300
Related Commands
slot/port/card Specifies the slot, card, or port of the interface used for timing.
hold-off Specifies the hold-off timer value.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.
Command Description
network-clock
hold-off
Configures general hold-off timer in milliseconds.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English